A typical DMX-512 based system consists of sub components other than Lights, required for various supporting functionalities. We do support custom component development. Feel free to write if you are trying to figure out a solution for your requirements.
Below are some of the subsystems in a typical DMX-512 Lighting Solution,
DMX Master Controller
DMX Signal Amplifier
DMX Decoder
DMX CC Driver
DMX Converter
DMX Cables
(All Product Pictures are for representation Purpose, subject to periodic changes)
DMX Master Controller
Arkatron DMX Master Controller is a DIN Rail mountable compact solution which can control 1 Universe and has 1 Output DMX Port. There are 10 inbuilt effects which can be selected using buttons. Selected effect is stored in internal memory and is played back continuous until a new effect is selected. It supports 1 Color, 2 Color, 3 Color, 4 Color Channel space to be selected while ordering. Effect customization is possible, please write to us about your requirements.
DMX Signal Amplifier
DMX Signal Amplifier or Boosters are required in two conditions. If the distance between last light in Dasiy Chain is 150M or more from the DMX Master else Number of Lights in Dasiy Chain are more than 20 or so. Arkatron Signal Amplifiers generate one Isolated port and are suitable to readily use in outdoors.
DMX Decoder
DMX Decoders are used to connect PWM Dimmable LED Panels and LED Strips. The decoders supports manual ID Configuration in few models. The Output is 4 Channel . In few models the DMX Decoder can also act as a DMX Master to synchronize other slave DMX decoders and create simple effects without using a DMX Master Controller.
DMX CC Driver
DMX Constant Current (CC) drivers are energy efficient solution to drive Led Panels. The CC Driver family can offer output current range from 350mA to 2.5A per Channel. The operating voltage is 24V DC and support upto 4 Color Channels. The CC Drivers allows configuration for ID, Chanel Space, Output Current.
DMX to Analog Converter
For high power LED Lights which are used for area flood lighting , sports lighting, factories; these lights can be controlled using DMX to save energy or create highlighting effects. The Analog Dimmable LED Drivers can be integrated with DMX Control system using DMX to Analog converter. The Converter is powerd by the Auxillary 12V supply from the LED Driver itself.
DMX Cables
For low voltage application and outdoor usage, IP68 Connector end multi core wires are used. For 230V operation the DMX cable is used separate than power line and typically a 3 core shielded cable with IP68 Connector end are used. There are also various lengths of Jumper cables used as patch cable between Master Controller to light, light to light etc. For high power and low voltage lights the cable needs to be custom ordered. For Indoor application 3 core XLR Connector is the Popular Choice.
